Fiberglass Hose Heat Shield Sleeve 1" IDX10' Spark Plug Wire Heat Protector Boots Auto Hose Roll 2500 Degree for Car＆Auto Wire oom Brake Line Cable
当サイトをご覧頂き誠にありがとうございます。弊社商品は全て正規店からの新品・並行輸入品です。税関手続・関税払いは全て弊社で対応の上、全国送料無料でお届けします。弊社海外倉庫より国内に発送しますので、お届けまで2-15営業日程度お時間を頂いております。税関検査により無作為に開封された場合、ごく稀に外箱に損傷が生ずる場合がありますが、商品自体の品質には問題ございませんのでご安心ください。（商品が電波法上の技術基準に適合する必要がある無線機器の場合：商品は並行輸入品のため、電波法上の技術基準に適合致しません。日本国内で使用すると電波法に違反する恐れがありますので、ご購入・ご使用には十分ご注意ください）・? Fiberglass Heat Shield Sleeve ―― This black fiberglass wire heat shield sleeve tape is made of high quality fiberglass material which can withstand higher temperature than those fiberglass hose heat shield. The wire heat shield wrap for car wire can help to prevent vapor lock, protect spark plug wires from melting,and protect sensitive wire looms from close proximity heat,shielding brake lines and hose and stopping clutch cables from melting.
・? Sleeve Length ―― This spark plug wire heat shield sleeve is length adjustable, The automotive heat shield sleeve wrap can be easily cut to the proper length for each spark plug boot/wires. Great sleeve to help protect wires from heat. This heat sleeve is about 10" (3m) in length and 1" ID (25mm) inner diameter approximately.
・? Withstand High Temperature ―― Hose wire heat shield roll can reduce 80 percent of radiant heat. Black fiberglass heat shield sleeve can withstand 2500 degree intermittment high temperature and 1800 degree continuous temperature use. Provide protection to fuel line etc.
・? Easy Installation ―― TEEORKKL brand automotive heat shield sleeve are specially woven and can be expanded and shrunk by fittings, cables, terminals, etc. Simply pull the wires inside, AN hoses, cables, etc. Heat wrap sleeves. The insulation heat shield sleeve is thin and flexible and easy to install.
・? More Application ―― Designed to fit most motor vehicle engines and is easy to install, making it a versatile addition to any engine bay. Special for car wire loom brake line cable protection, and suitable for cars, trucks.
説明:
Descriptions:
Heat shield sleeve wrap can provide good protection to your brake lines wires hose.
You can use it to insulate fuel and brake lines that are run close to the exhaust. Also be used in around engine to keep lines and wires from getting too hot.
The heat shield sleeve can also clean up hoses and pipes while also insulating from heat. works great, must have if you are wiring anything near an exhaust or engine parts.
Heat wrap sleeve can be easily cut to size you need and protects spark plugs wires.
Withstands operating reflective temperature of 2500 degree intermittent and 1800 degree continuous .
Can reduce up to 80% of radiant heat.
Specifications:
Length： Approx 10 feet (118inch)
Inner diameter: About 25mm(1inch)
Color: black
Material: High quality fiberglass.
Package included:
1* 10FT-25mm black Heat hose wrap sleeve
Warnings:
1) Safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.
2) Keep it away from the open fire
3) Use gloves to handle while cutting and installation.
カテゴリー:
メーカー: TEEORKKL
ブランド: TEEORKKL
高さ: 10.8 センチ
幅: 8.7 センチ
奥行: 4.6 センチ
重量: 0.2 Kg
当サイトをご覧頂き誠にありがとうございます。弊社商品は全て正規店からの新品・並行輸入品です。税関手続・関税払いは全て弊社で対応の上、全国送料無料でお届けします。弊社海外倉庫より国内に発送しますので、お届けまで2-15営業日程度お時間を頂いております。税関検査により無作為に開封された場合、ごく稀に外箱に損傷が生ずる場合がありますが、商品自体の品質には問題ございませんのでご安心ください。（商品が電波法上の技術基準に適合する必要がある無線機器の場合：商品は並行輸入品のため、電波法上の技術基準に適合致しません。日本国内で使用すると電波法に違反する恐れがありますので、ご購入・ご使用には十分ご注意ください）
・? Sleeve Length ―― This spark plug wire heat shield sleeve is length adjustable, The automotive heat shield sleeve wrap can be easily cut to the proper length for each spark plug boot/wires. Great sleeve to help protect wires from heat. This heat sleeve is about 10" (3m) in length and 1" ID (25mm) inner diameter approximately.
・? Withstand High Temperature ―― Hose wire heat shield roll can reduce 80 percent of radiant heat. Black fiberglass heat shield sleeve can withstand 2500 degree intermittment high temperature and 1800 degree continuous temperature use. Provide protection to fuel line etc.
・? Easy Installation ―― TEEORKKL brand automotive heat shield sleeve are specially woven and can be expanded and shrunk by fittings, cables, terminals, etc. Simply pull the wires inside, AN hoses, cables, etc. Heat wrap sleeves. The insulation heat shield sleeve is thin and flexible and easy to install.
・? More Application ―― Designed to fit most motor vehicle engines and is easy to install, making it a versatile addition to any engine bay. Special for car wire loom brake line cable protection, and suitable for cars, trucks.
説明:
Descriptions:
Heat shield sleeve wrap can provide good protection to your brake lines wires hose.
You can use it to insulate fuel and brake lines that are run close to the exhaust. Also be used in around engine to keep lines and wires from getting too hot.
The heat shield sleeve can also clean up hoses and pipes while also insulating from heat. works great, must have if you are wiring anything near an exhaust or engine parts.
Heat wrap sleeve can be easily cut to size you need and protects spark plugs wires.
Withstands operating reflective temperature of 2500 degree intermittent and 1800 degree continuous .
Can reduce up to 80% of radiant heat.
Specifications:
Length： Approx 10 feet (118inch)
Inner diameter: About 25mm(1inch)
Color: black
Material: High quality fiberglass.
Package included:
1* 10FT-25mm black Heat hose wrap sleeve
Warnings:
1) Safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.
2) Keep it away from the open fire
3) Use gloves to handle while cutting and installation.
カテゴリー:
メーカー: TEEORKKL
ブランド: TEEORKKL
高さ: 10.8 センチ
幅: 8.7 センチ
奥行: 4.6 センチ
重量: 0.2 Kg
当サイトをご覧頂き誠にありがとうございます。弊社商品は全て正規店からの新品・並行輸入品です。税関手続・関税払いは全て弊社で対応の上、全国送料無料でお届けします。弊社海外倉庫より国内に発送しますので、お届けまで2-15営業日程度お時間を頂いております。税関検査により無作為に開封された場合、ごく稀に外箱に損傷が生ずる場合がありますが、商品自体の品質には問題ございませんのでご安心ください。（商品が電波法上の技術基準に適合する必要がある無線機器の場合：商品は並行輸入品のため、電波法上の技術基準に適合致しません。日本国内で使用すると電波法に違反する恐れがありますので、ご購入・ご使用には十分ご注意ください）